How to Remove Water from Your Speakers
Accidentally dropped your phone in water or got it wet in the rain? If your speakers now sound muffled, quiet, or distorted, there’s a good chance water is trapped inside them. Don’t worry — it happens to almost everyone at some point. The good news is, you can easily remove water from your speakers without opening your phone or visiting a repair shop. This guide explains why water gets stuck, what you should avoid doing, and the best methods to safely eject water from your phone’s speakers.
Why Water Affects Speaker Sound
When water enters your phone’s speaker grill, it doesn’t necessarily mean your speaker is broken. Most modern smartphones are water-resistant, but not completely waterproof. The small holes in the speaker mesh allow sound to travel out — and if water enters, it blocks the sound waves from vibrating properly. This leads to:
- Muffled or crackling audio
- Very low volume
- Unbalanced sound between speakers
- Distorted tones during calls or music playback
If not removed quickly, trapped water can also cause corrosion inside the speaker components, permanently reducing sound quality.
What You Should Never Do
Before trying to fix your phone, it’s important to know what not to do. Many people make these common mistakes that can cause more damage:
- Do not shake your phone aggressively. It can push water deeper into internal parts.
- Do not use a hairdryer or heat gun. Excess heat can damage internal circuits and seals.
- Do not put your phone in rice. Contrary to popular belief, rice does little to remove trapped moisture inside speakers and can even leave dust behind.
- Do not play music at full volume. It may strain the wet speaker and cause it to blow out.
The safest solution is to use controlled sound frequencies that are designed specifically to push water out — and that’s exactly what speaker cleaning tools do.
Step 1: Use a Water Eject Tool
The easiest and most effective way to remove water from your speakers is by using a water eject tool. These tools play specific sound frequencies (often between 100 Hz and 300 Hz) that vibrate the speaker diaphragm, pushing trapped water droplets outward.
You can try this method directly from your browser by visiting Water eject. It’s a free, web-based tool that doesn’t require installation.
Follow these steps:
- Open speakerscleaner on your phone’s browser.
- Make sure your phone’s volume is set to maximum.
- Tap “Start Cleaning.”
- The website will play sound waves that eject water and dust particles.
- Let it run for 20 to 30 seconds, then test your speaker by playing a song or video.
If the sound still feels slightly muffled, you can repeat the process two or three times until clarity is restored.
Step 2: Try the Speaker Cleaning App
If you prefer using a mobile app, you can download the Speaker Cleaner app from the Play Store:
It offers additional features such as:
- Manual or automatic frequency control
- Different modes for water or dust removal
- Support for most Android devices
- Simple interface with one-tap operation
The app produces alternating high and low-frequency sound waves that expel trapped moisture effectively. It’s safe, fast, and highly rated by users for restoring sound after water damage.
Step 3: Dry the Speaker Area Naturally
Once you’ve used a sound-based cleaning tool, it’s a good idea to let your phone dry completely. Here’s how to do it safely:
- Place your phone on a dry surface in an upright position.
- Leave it in a well-ventilated room for at least 30 minutes.
- You can also place it near (but not on) a fan to improve air circulation.
- Avoid direct sunlight or heaters, as they may cause heat damage.
This step ensures any remaining moisture evaporates naturally.
Step 4: Use Compressed Air for Dust and Residue
If your speakers still sound uneven or crackly after cleaning, there might be dust residue left behind. Use a small air blower or compressed air can to gently remove it.
Hold the can at least 10 cm away from the speaker grill and use short bursts. Be careful not to blow too hard, as excessive pressure can damage the speaker mesh.
Step 5: Test Your Speaker Performance
After cleaning and drying, test your speaker to ensure it’s working properly.
You can do this by:
- Playing music or videos at medium volume.
- Using a speaker test video on YouTube to check sound balance.
- Making a phone call to verify voice clarity.
If the sound is clear and balanced, the water has been successfully removed. If it still sounds muffled, repeat the eject process or leave your phone to dry for a few more hours.
Preventing Future Water Damage
Once your speakers are working again, take a few precautions to avoid this problem in the future:
- Avoid using your phone near pools, sinks, or showers.
- Invest in a waterproof case if you often use your phone outdoors.
- Don’t play loud sounds immediately after water exposure. Give it time to dry first.
- Clean your speakers monthly to prevent buildup of dust or residue that traps moisture.
These small steps will keep your speakers clear, your sound quality consistent, and your device safe from long-term damage.
Final Thoughts
Removing water from your speakers doesn’t require technical skills or expensive tools. With the right frequency-based cleaning method, you can fix muffled or distorted sound in minutes. The easiest way to do this is by using a water eject tool like speakerscleaner or its mobile version on the Play Store. These tools are designed specifically to vibrate water out and restore your speaker’s original clarity.
Whether your phone got wet from rain, accidental splashes, or a quick dip, acting quickly and using the right methods will help you save your speaker and keep your sound crisp and powerful.
Table of Contents